About Ugly SRT(Gen 2)
- Main body:
Ugly SRT main body is made of 6061 aircraft grade aluminum alloy (USA-made round stock),
hard anodic oxidation coated for maximum wear resistance. CNC lathe milled to be within
A high-grade France-made AB SKF deep groove ball bearing is press-fitted to the main body
and provides a very smooth trimming operation. This bearing retails for more than $20 in Australia. Brass tip set screws were used!
- Snap-fit caliber collet insert：
Made of 303 stainless steel, CNC lathe turned with high accuracy. This collet insert can be
removed easily with our insert removal tool. The collet can be installed by a thumb press.
No.0 collet blank is made of 12L14 easy machining steel for gunsmith or DIY use. 12L14 steel
is NOT stainless but it is more friendly to reamers on a manual lathe.
- Milling blade cutter:
The milling blade is made of M2AL HSS, extremely sharp and durable. The milling blade and
shank are centerless ground to slide fit shank hole with only 0.01mm in the gap. Therefore, the
cross-section cut on the brass will be clean and smooth. The trimmer won’t wobble when in
the rotation due to high concentricity.
- Innovative Lock n Adjust ring:
Each set comes with an adjustable ring. Users can use a feeler gauge or simply a piece of paper
for precise trimming depth adjustment. If the user wishes to change caliber, this adjustment ring can be locked onto the cutter shank. The cutter can be installed back into the main body to repeat the previous settings without any resetting needed.
- Collet removal tool:
Made of 304 stainless steel.
Complete content list of Ugly SRT set:
1 pc Main body fitted with bearing
1 pc Caliber collet insert at buyer’s choice
1 pc M2AL-HSS milling blade cutter
1 pc Lock N Adjust ring
1 pc Collet removal tool
1 pc Collapsible package with Vpi rust inhabitant paper
Please advise collet insert No. when you put the order! We will contact you if a collet number is not provided.
UGLY SRT manual 23JUL2023 33 collets updatedSRT power drill trimmer with 1 insert.